Automatic HGV wheel balancer, 10 to 24 inches + pneumatic wheel lift
€2,253.98 incl. VATi.e. €1,832.50 excl. VAT
In stockDepartment
Workshop and garage
Vehicle lifts, tyre changers, wheel balancers, workshop tools, pressure washers and sweepers for garages, workshops and farms.
- 129 products
- 18 brands
- Free delivery from €400.00
- Buying guide
129 products
- Bright
Bright CB78NP wheel balancer – touchscreen, sonar, pneumatic clamping
€4,713.98 incl. VATi.e. €3,832.50 excl. VAT
In stock Automatic car wheel balancer with sonar – manual clamping
€3,073.98 incl. VATi.e. €2,499.17 excl. VAT
In stockPneumatic tyre spreader – HGV and agricultural
€1,536.48 incl. VATi.e. €1,249.17 excl. VAT
In stockHGV and agricultural machinery tyre changer, 14 to 56 inches
€5,123.98 incl. VATi.e. €4,165.83 excl. VAT
In stockHGV tyre changer, 14 to 26 inches
€3,872.45 incl. VATi.e. €3,148.33 excl. VAT
In stockLC890S semi-automatic tyre changer, 11 to 26 inches
€1,230.00 incl. VATi.e. €1,000.00 excl. VAT
In stockPremium CVT automatic tyre changer, 10 to 23 inches, with automatic 3rd arm
€2,050.00 incl. VATi.e. €1,666.67 excl. VAT
In stockCVT automatic tyre changer, 11 to 26 inches, with 3rd arm
€3,843.75 incl. VATi.e. €3,125.00 excl. VAT
In stockAutomatic tyre changer, 11 to 26 inches, with 3rd arm
€3,485.00 incl. VATi.e. €2,833.33 excl. VAT
In stock- IKOTEC
IKOTEC 3000 2.5 t single-post mobile vehicle lift
€1,127.50 incl. VATi.e. €916.67 excl. VAT
In stock 1.5 t engine lift table
€3,075.00 incl. VATi.e. €2,500.00 excl. VAT
In stock1 t hydraulic transmission jack for gearbox removal
€2,050.00 incl. VATi.e. €1,666.67 excl. VAT
In stockML75W wireless HGV column lifts (set of 6)
€25,623.98 incl. VATi.e. €20,832.50 excl. VAT
In stockML75W wireless HGV column lifts (set of 4)
€16,400.00 incl. VATi.e. €13,333.33 excl. VAT
In stockML75W wireless column lifts (set of 2)
€9,225.00 incl. VATi.e. €7,500.00 excl. VAT
In stock12 t HGV 4-post vehicle lift, 6.3 m platforms
€25,623.98 incl. VATi.e. €20,832.50 excl. VAT
In stock30 t HGV 4-post vehicle lift, 8 m platforms
€56,373.98 incl. VATi.e. €45,832.50 excl. VAT
In stock25 t HGV 4-post vehicle lift, 8 m platforms
€51,248.98 incl. VATi.e. €41,665.83 excl. VAT
In stock16 t HGV 4-post vehicle lift, 8 m platforms
€46,123.98 incl. VATi.e. €37,499.17 excl. VAT
In stockFour-post vehicle lift 8 t for HGVs, 6.2 m platforms
€20,498.98 incl. VATi.e. €16,665.83 excl. VAT
In stockFour-post vehicle lift 5.5 t with wheel alignment kit
€11,787.50 incl. VATi.e. €9,583.33 excl. VAT
In stockFour-post vehicle lift 5 t with integrated 4 t scissor lift
€10,762.50 incl. VATi.e. €8,750.00 excl. VAT
In stockGEO500 pack: CONSOGARAGE 500 four-post vehicle lift 5 t and SMART613 mobile 3D Wi-Fi wheel aligner
€11,275.00 incl. VATi.e. €9,166.67 excl. VAT
In stock
- Free delivery from €400.00France and 18 other European countries
- 30-day returnssubject to conditions
- Secure paymentSEPA bank transfer
- Advice+33 2 48 37 21 17
Buying guide
How to choose: Workshop and garage
This category equips mechanical workshops and garages: vehicle lifts, tyre changers, wheel balancers, workshop equipment and cleaning equipment. This equipment is intended for professionals in car, agricultural and heavy goods vehicle maintenance, as well as for well-equipped private workshops.
Selection criteria
- Vehicle type
Light vehicles, vans or HGVs: the lifting capacity, the wheel sizes accepted and the dimensions of the equipment must match the vehicles you service.
- Power supply
Many workshop machines run on 230 V single-phase or 400 V three-phase power, some with a compressed-air connection. Check your installation before purchasing.
- Siting
Measure the ceiling height, the available floor area and the quality of the concrete slab, particularly for a vehicle lift, which must be anchored in accordance with the manufacturer's recommendations.
- Security
Compare the safety devices: mechanical locks, limit switches, guards. Installation and inspections must comply with the manufacturer's instructions.
- Use and throughput
A high-throughput professional workshop does not have the same needs as an occasional one: cycle speed, automation and robustness make the difference.
Frequently asked questions
What concrete slab is needed for a vehicle lift?
The manufacturer specifies the thickness and strength of the concrete required for anchoring. This information is given in the instruction manual; contact us to obtain it before purchase.
Is the equipment delivered assembled?
Bulky equipment is generally delivered on a pallet, to be installed according to the manufacturer's instructions. For installation, please contact a qualified professional.
Is three-phase power required?
Not always: some models are available in 230 V single-phase. The required voltage is shown on the product page.
Need personalised advice? Call us on +33 2 48 37 21 17 (Monday to Friday, 9 am – 6 pm) or write to us.