Skip to main content

Welcome to AGRI-TECH Motoculture! Monday to Friday: 9 am to 6 pmMonday to Friday: 9 am to 6 pm

Free delivery from €400.00 in France and 18 European countriesFree delivery from €400.00, France and 18 countries

Returns within 30 days · Secure payment by SEPA transfer

Department

Power, pumping and storage

Generators, motor pumps, fuel tanks and fuel stations, water storage.

57 products

Buying guide

How to choose: Power, pumping and storage

This category covers power generation, pumping and storage: generators, motor pumps, tanks and fuel and water storage equipment. This equipment is used on construction sites, on farms, as back-up during a power cut, or for irrigation and liquid transfer.

Selection criteria

  1. Electrical power

    Add up the power of the appliances to be supplied at the same time and take account of the start-up peaks of electric motors. Compare continuous power, which is more representative than maximum power.

  2. Single-phase or three-phase

    A single-phase 230 V generator powers everyday tools; three-phase 400 V is required for some professional machines. Check the voltage required by your equipment.

  3. Flow rate and head

    A motor pump is chosen according to the desired flow rate, the delivery head and the type of liquid: clean water, dirty water or sludge.

  4. Compliant storage

    For fuel, choose a tank suited to the product and the volume, with retention if necessary. Find out about the applicable rules before installation.

  5. Noise and use

    A soundproofed or inverter generator is quieter and provides a stable current for electronic devices. For prolonged use, compare running time and fuel consumption.

Frequently asked questions

What generator power should I choose?

Add up the power of the appliances used at the same time, add a margin and take into account the inrush current when motors start. If in doubt, contact us with the list of your equipment.

Can a generator be connected to the household installation?

Connection to an electrical installation must be made via a changeover switch installed by a qualified professional, to prevent any backfeed of current into the grid.

Motor pump for clean water or dirty water?

A clean water pump is designed for water without particles. For muddy or dirty water, choose a model suitable for solids, as stated on the product page.

Need personalised advice? Call us on +33 2 48 37 21 17 (Monday to Friday, 9 am – 6 pm) or write to us.

Free deliveryFrom €400.00 in France and 18 other European countries

Secure paymentSEPA bank transfer, free of charge

30-day returnsUnder our terms and conditions

Advice & after-salesMonday to Friday, 9 am – 6 pm